TBProAudio Impress v3.2.4 U2B for macOS

MORiA | AU | VST | VST3 | 13.6 MB

Architecture Impress3 supports you in mastering the extensive tasks in the field of compression in modern music productions. Impress3 is therefore more than just a compressor. It supports all loudness adjustment tasks, from compression and loudness matching to limiting and clipping.

Compressor design The compressor consists of various modules including detector, transfer curve and gain staging. Measurement methods such as peak, RMS and EBU R128 ML/SL are supported. There is also a filter bank with four EQs.

Overview Top area with parameter A/B, presets, theme selector Main controls like threshold/compression, ratio, attack and release Advanced controls like transfer curve, look-ahead, over-sampling, detector, loudness matching, limiter, clipper and ABLM Level display with xfer and loudness distribution display Meter display Spectrum analyzer inlcuding EQ response curve

Main controls The main control area provides access to the main compressor controls like threshold/compression, ratio, attack and release.

Advanced controls The advanced control area gives access to further controls like controls of Xfer input/output, look-ahead, over-sampling, detector, saturation, loudness matching, limiter, clipper and ABLM.

Displays The level display shows the history of the input, output and gain reduction levels. It makes it easy to follow the processing on the input signal. The three meters (light gray) display the current peak input (left), output (right) and gain reduction levels (middle), each in stereo, left/right channel. The spectrum analyzer shows the spectrum of the compressor detector signal (pre and post filter) and the filter response curve. The Xfer display shows the compressor transfer curve (detector signal), input level (horizontal) against output (vertical). The loudness distribution display shows how the input, output and gain reduction values ​​are distributed over selected time range.

Features zero latency click-free 64-bit internal processing low aliasing compressor design "real" over-sampling, up to 8x stereo/left/right/mid/side processing 5 compressor modes: classic, source/target, vari, advanced and feedback non-linear and linear attack/release time shapes gain reduction dependent saturation 4 level detection modes: peak, RMS, EBU ML and EBU SL external side-chain detector pre-filter look ahead low aliasing soft knee gain reduction limit dry/wet peak/RMS/EBU R128 measurement detector/delta listen mode target loudness matching based on EBU R128 look-ahead limiter (Peak or True Peak) clipper perceptual A/B loudness matching (ABLM) preset management parameter A/B large and accurate live meters peak control view gain transfer view loudness distribution view detector spectrum view free GUI size and scale

Whats new in this version 3.2.4 - FIX: faulty default attack delay settings

System Requirements Mac OS X 10.11 - 14 (Intel , Arm M1/2/3), Metal GFX card

架构 Impress3 帮助您掌握现代音乐制作中广泛的压缩任务。因此，Impress3 不仅仅是压缩器。它支持所有响度调整任务，从压缩和响度匹配到限制和削波。 压缩器设计 压缩器包括各种模块，如检测器、传输曲线和增益阶段。 支持诸如峰值、RMS 和 EBU R128 ML/SL 等测量方法。 还有一个包含四个 EQ 的滤波器银行。 概述 顶部带有参数 A/B、预设和主题选择区域 主控制区域（阈值/压缩、比率、衰减和释放） 高级控制区域（传输曲线、前瞻、过采样、检测器、响度匹配、限制器、削波器和 ABLM） 显示历史输入、输出和增益减少级别，便于跟随输入信号的处理。 三个表（浅灰色）显示当前峰值输入（左侧）、输出（右侧）以及增益减少水平（中间），每个以立体声方式显示左/右通道。 频谱分析仪显示压缩检测信号（前置滤波器前/后）的频谱和滤波响应曲线。 传输显示显示压缩器传输曲线（检测信号），输入电平（横向）与输出电平（垂直）。 响度分布显示如何在选定的时间范围内分配输入、输出和增益减少值。 功能 零延迟无咔嗒声的 64 位内部处理 低混叠压缩器设计 “真实”的过采样，最高可达 8x 立体声/左声道/右声道/中置/侧声道处理 5 种压缩模式：经典、源/目标、变式和高级反馈 非线性和线性的衰减时间形状 增益减少依赖饱和度 4 级检测模式：峰值、RMS、EBU ML 和 EBU SL 外部侧链 检测器前置滤波器 前瞻 低混叠软门槛 增益减少限制 干/湿显示 峰值/RMS/EBU R128 测量 检测器/听感模式 基于 EBU R128 的目标响度匹配 前瞻限幅（峰或真峰） 削波器 感知 A/B 响度匹配（ABLM） 预设管理 参数 A/B 显示 大且准确的活动表盘显示 峰值控制视图 增益传递视图 响度分布视图 检测器频谱视图 自由 GUI 大小和比例 此版本的新功能 3.2.4 - 修复了故障的默认衰减延迟设置

---

Download from free file storage

 Download from rapidgator.net  Download from nitroflare.com

---

我要反馈

---

本站不对文件进行储存，仅提供文件链接，请自行下载，本站不对文件内容负责，请自行判断文件是否安全，如发现文件有侵权行为，请联系管理员删除。